W/m2 Erythemally Effective (Eeff) UVR
Product Description
SOLAR METER
MODEL 7.5 UV METER
Features
Integral Sensor
Compact
Durable
Accurate
LCD readout
Check EU 0.3 W/m2 Maximum
Acrylic Shield Transmission
Eye wear UV block comparison
Sensor/Detector
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap.
Interference filter coating (Metal Oxide) blocks UV above erythermal response as show on Spectral Sensitivity Graph.
Operation
Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. For tanning beds place meter at body position. Note reading on LCD and record if desired.
Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years.
Allow lamps to warm-up prior to taking readings (at least 5 min).
Hold sensor close to lamp or acrylic to measure individual lamp Eeff intensity. Hold sensor at 25 cm above bench with canopy closed for body position reading.
When checking aging of lamps, keep measuring distance and locations constant
MODEL 7.5 UV METER
Features
Integral Sensor
Compact
Durable
Accurate
LCD readout
Applications
Check EU 0.3 W/m2 Maximum
Acrylic Shield Transmission
Eye wear UV block comparison
Solar meter Specifications Radiometer | |
Model | 7.5 |
Irrad. Range | 19.99 W/m2 Ery |
Response | 280-400 nm Diffey Erythermal Action Spectrum |
Resolution | 0.01 W/m2 |
Conv. Rate | 3.0 Readings/Sec |
Display | 3.5 Digit LCD |
Digit Size | 0.4 inch high |
Oper. Temp | 32 F TO100 F |
Oper. Humid. | 5% TO 80% RH |
Accuracy | 10% REF.NIST |
Dimensions (in.) | 4.2L x 2.4W x 0.9D (inches) |
Weight | 4.5 OZ. (incl. batt.) |
Power Source | 9-Volt DC Battery |
Lens | UV Glass |
Diffuser | Virgin PTFE .005 |
Detector | SIC/IF Photodiode |
Sensor/Detector
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap.
Interference filter coating (Metal Oxide) blocks UV above erythermal response as show on Spectral Sensitivity Graph.
Operation
Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. For tanning beds place meter at body position. Note reading on LCD and record if desired.
Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years.
Proper Usage of Solarmeter Ultraviolet Radiometer for Lamp Tests:
Allow lamps to warm-up prior to taking readings (at least 5 min).
Hold sensor close to lamp or acrylic to measure individual lamp Eeff intensity. Hold sensor at 25 cm above bench with canopy closed for body position reading.
When checking aging of lamps, keep measuring distance and locations constant
Related Products
Contact Us
No. 001, Priya Enclave, Beside E-Seva, Road No. 9, Snehapuri Colony, Nacharam, Hyderabad, Telangana, 500076, India
Phone :+918035063233