MED/HR Erythemally Effective (Eeff) UVR Index Meter
Product Description
SOLARMETER
MODEL 7.0 UV METER
MED/HR ERYTHEMALLY EFFECTIVE (Eeff) UVR
Feature
Integral Sensor
Compact
Durable
Accurate
LCD readout
Estimate Tanning Te Time
Acrylic Shield Transmission
Eye wear UV block comparison
Sensor/Detector
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap.
Interference filter coating (Metal Oxide) blocks UV above erythermal response as show on Spectral Sensitivity Graph.
Operation
Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. For tanning beds place meter at body position. Note reading on LCD and record if desired.
Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years
MODEL 7.0 UV METER
MED/HR ERYTHEMALLY EFFECTIVE (Eeff) UVR
Feature
Integral Sensor
Compact
Durable
Accurate
LCD readout
Applications
Estimate Tanning Te Time
Acrylic Shield Transmission
Eye wear UV block comparison
Solar meter Specifications Radiometer | |
Model | 7.0 |
Irrad. Range | 0-199.9 MED/hr |
Response | 280-400 nm Diffey Erythermal Action Spectrum |
Resolution | 0.1 MED/HR |
Conv. Rate | 3.0 Readings/Sec |
Display | 3.5 Digit LCD |
Digit Size | 0.4 inch high |
Oper. Temp | 32 F TO100 F |
Oper. Humid. | 5% TO 80% RH |
Accuracy | 10% REF.NIST |
Dimensions (in.) | 4.2L x 2.4W x 0.9D (inches) |
Weight | 4.5 OZ. (incl. batt.) |
Power Source | 9-Volt DC Battery |
Lens | UV Glass |
Diffuser | Virgin PTFE .005 |
Detector | SIC/IF Photodiode |
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap.
Interference filter coating (Metal Oxide) blocks UV above erythermal response as show on Spectral Sensitivity Graph.
Operation
Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. For tanning beds place meter at body position. Note reading on LCD and record if desired.
Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years
Proper Usage of Solar meter Ultraviolet Radiometer for Lamp Tests:
- Wear UV-block eye protection when checking UV lamps.
- Allow lamps to warm-up prior to taking readings (at least 5 min).
- Hold sensor close to lamp or acrylic to measure individual lamp MED intensity. Hold sensor at 25 cm above bench with canopy closed for body position reading. Te (Time to 4 MEDs in minutes) = 240 / MED/hr reading.
Related Products
Contact Us
No. 001, Priya Enclave, Beside E-Seva, Road No. 9, Snehapuri Colony, Nacharam, Hyderabad, Telangana, 500076, India
Phone :+918035063233